【英単語】adipsiaを徹底解説!意味、使い方、例文、読み方

【英単語】adipsiaを徹底解説!意味、使い方、例文、読み方

参考:「adipsia」の例文一覧

例文 He was diagnosed with psychogenic adipsia and was treated successfully with fluids, mirtazapine and clonazepam.
彼は心因性脂肪症と診断され、輸液、ミルタザピン、クロナゼパムによる治療に成功した。
【adipsia】に関するの例文(英語の例文と和訳)
例文 A thorough clinical investigation confirmed a diagnosis of primary adipsia and hypernatraemia secondary to a non-secretory neuroendocrine pituitary macroadenoma.
綿密な臨床検査により、非分泌性神経内分泌下垂体巨大腺腫に続発する原発性脂肪症および高ナトリウム血症の診断が確認されました。

「adipsia」のネイティブ発音(読み方)を聞きましょう!

読み方は【eɪˈdɪpsɪə】です。下記動画を聞きながらeɪˈdɪpsɪəを大声で発音しましょう

【絶対聞こう】アメリカ人が「adipsia」の意味について解説】!


adipsiaの実際の意味・ニュアンス(アジピン)を理解して、正しく使いましょう!

A process for producing adipic acid, characterized in that a wastewater containing hydroxycaproic acid and discharged from the step of oxidizing cyclohexane with molecular oxygen in a liquid phase is reacted with hydrogen peroxide in the presence of a tungsten catalyst in the pH range of 0 to 6.
シクロヘキサンを分子状酸素で液相酸化する工程から排出されるヒドロキシカプロン酸を含む排水と、過酸化水素とを、pH0~6の範囲でタングステン触媒の存在下に反応させることを特徴とする アジピン 酸の製造方法を提供する。
Main Applications Vinyl Chloride Resin Plasticizers A non-migrating plasticizer can be made by reacting with an aliphatic diacid such as adipic acid to form a low molecular weight polyester which subsequently undergoes esterification with an aliphatic alcohol like hexanol.
主な用途 塩化ビニル樹脂可塑剤 アジピン 酸等の脂肪族2塩基酸と反応させ低分子量のポリエステルとした後に末端カルボキシル基をヘキシルアルコールのような脂肪族アルコールでエステル化し、非移行性の可塑剤として使用できます。
The success of this reaction has implications for both the biocatalytic production of the commodity chemical adipic acid, a precursor for nylon, and in the design of other proteins.
この反応の成功は、ナイロンの前駆体である汎用化学物質 アジピン 酸の生物触媒による生産とともに、ほかのタンパク質の設計に関しても意義のあるものである。
The authors noted that the missing reaction from a biocatalytic process to make the widely-used adipic acid was very similar to the reaction catalyzed by a mutant of isocitrate dehydrogenase identified in cancer cells.
研究チームは、広く利用されている アジピン 酸を製造する生物触媒過程に欠けている反応が、がん細胞に発見された変異型のイソクエン酸脱水素酵素が触媒する反応に酷似していることに気付いた。
This year, the Grand Prize winner was chosen for its achievement in reducing greenhouse gas emissions during the process of producing adipic acid, a raw material for nylon in fiscal 2004, by 50 percent compared to level of tfiscal 1990, the base year.
大賞に輝いた旭化成グループは、ナイロンなどの原料となる アジピン 酸の製造工程で温室効果ガス排出量を基準年度である1990年度より50%まで削減した(2004年度)ことが評価された。
Polyamide MXD6 is a crystalline thermoplastic polymer, manufactured from m-xylylene diamine (MXDA) and adipic acid.It exhibits higher mechanical strength/modulus and lower water absorption, compared to polyamide-6 and polyamide-66.
ポリアミドMXD6は、メタキシリレンジアミン(MXDA)と アジピン 酸とから得られる結晶性の熱可塑性ポリマーであり、ポリアミド6やポリアミド66と比較し、機械的強度や弾性率が高く、吸水性が低いなどの特長を有しています。
On February 28, 1935, Gerard Berchet, under the direction of Carothers, produced a half-ounce of polymer from hexamethylenediamine and adipic acid, creating polyamide 6-6, the substance that would come to be known as Nylon.
1935年2月28日、ジェラード・ベルシェはカロザースの指導でヘキサメチレンジアミンと アジピン 酸から半オンスの重合体、ポリアミド 6-6 を作り、これがナイロンと名付けられた。
The organic acid is preferably any of glutaric acid, adipic acid, azelaic acid, glycolic acid, diglycolic acid, picolinic acid or 2-phenylsuccinic acid, and the added quantity thereof is preferably 0.5 to 5.0 mass %.
有機酸は、グルタル酸、 アジピン 酸、アゼライン酸、グリコール酸、ジグリコール酸、ピコリン酸、2フェニルコハク酸のいずれかであることが好ましく、添加量は、0.5~5.0質量%とすることが好ましい。
Specifically disclosed is a method for producing a tablet in which a morphinan compound represented by the general formula (I) below or a pharmacologically acceptable acid addition salt thereof and an acidic substance such as fumaric acid, maleic acid or adipic acid are blended.
該製造方法は、下記一般式(I)で表されるモルヒナン化合物またはその薬理学的に許容される酸付加塩と、例えばフマル酸、マレイン酸、 アジピン 酸等の酸性物質とを配合してなる錠剤の製造法であって、酸性物質との配合前にモルヒナン化合物またはその薬理学的に許容される酸付加塩を賦形剤と共に湿式造粒することを特徴とする錠剤の製造法である。
Succinic acid Succinic acid may be of interest as a key building block for deriving various commodity chemicals including 1,4-butanediol, adipic acid and tetrahydrofuran as well as biodegradable polymers such as polybutylene succinate and polybutylene succinate adipate.
バイオプロセスによってより安価な生産が可能となれば、1,4-ブタンジオール、 アジピン 酸、テトラヒドロフランなど様々な汎用化学品の原料として、さらにポリブチレンサクシネート(PBS)などのポリマー原料としての展開も見込まれておりコハク酸生産のバイオプロセス化が近年注目されています。
The cellulose ester composition contains (A) a cellulose ester and (B) a plasticizer, and the plasticizer of component (B) contains at least one substance selected from among the adipic acid esters represented by formulas (I), (II), and (III).
(A)セルロースエステルと(B)可塑剤を含んでおり、前記(B)成分の可塑剤が、下記式(I)、(II)及び(III)でそれぞれ表される アジピン 酸エステルから選ばれる少なくとも1種を含んでいるセルロースエステル組成物。
The cellulose resin composition is produced by adding a polyester plasticizer (A) to a cellulose resin, wherein the polyester plasticizer (A) is produced by the reaction between a polybasic acid component and a polyhydric alcohol, and wherein succinic acid and adipic acid make up 80 mol% or more of the polybasic acid component.
セルロース系樹脂に、(A)ポリエステル系可塑剤を添加して得られるセルロース系樹脂組成物であって、(A)ポリエステル系可塑剤が、多塩基酸と、多価アルコールとの反応により得られたものであり、多塩基酸の80モル%以上がコハク酸および アジピン 酸であるセルロース系樹脂組成物である。
The anticorrosive agent preferably is a nitrogen-containing organic compound such as 1H-1,2,4-triazole, benzotriazole, or the like, or an organic compound having a carboxyl group, for example, a dicarboxylic acid such as malonic acid, succinic acid, glutaric acid, adipic acid, pimelic acid, maleic acid, phthalic acid, malic acid, and tartaric acid, or a tricarboxylic acid such as citric acid.
防食剤は、1H-1,2,4-トリアゾールやベンゾトリアゾールなどの窒素含有有機化合物、又はカルボキシル基を有する有機化合物、例えば、マロン酸、コハク酸、グルタル酸、 アジピン 酸、ピメリン酸、マレイン酸、フタル酸、リンゴ酸及び酒石酸のようなジカルボン酸、並びにクエン酸のようなトリカルボン酸であることが好ましい。
This pharmaceutical composition for oral administration contains, as an active component, a 4-((1-methylpyrrole-2-yl)-carbonyl)-N-(4-(4-morpholine-1-yl-carbonyl piperidine-1-yl)-phenyl)-1-piperazinecarboxamide or a salt or solvate thereof, and contains, as an acidic additive, adipic acid, succinic acid, fumaric acid, L-aspartic acid, L-glutamic acid, or any combination of these.
4-((1-メチルピロール-2-イル)-カルボニル)-N-(4-(4-モルホリン-1-イル-カルボニルピペリジン-1-イル)-フェニル)-1-ピペラジンカルボキサミド又はその塩もしくはその溶媒和物を有効成分として含み、酸性添加剤として アジピン 酸、コハク酸、フマル酸、L-アスパラギン酸、L-グルタミン酸、又はこれらの組み合わせのいずれかを含有する経口投与用医薬組成物。
The core-sheath composite fiber is characterized in having a polyamide as a sheath component and having as a core component a polyester that is readily eluted in an alkali, the polyester containing 2.0-5.5 mol% of an isophthalic acid component with respect to the total acid component and 3.0-6.0 mol% of an adipic acid component relative to the total acid component, the isophthalic acid component containing metal sulfonate groups, and the main repeating units of the polyester being constituted of ethylene terephthalate.
主たる繰返し単位がエチレンテレフタレートより構成され、全酸成分に対し金属スルホネート基を含有するイソフタル酸成分が2.0~5.5モル%、全酸成分に対する アジピン 酸成分が3.0~6.0モル%含有するアルカリ易溶出性ポリエステルを芯成分、ポリアミドを鞘成分としたことを特徴とする芯鞘型複合繊維。
CYCLOHEXANOL, METHOD FOR PRODUCING CYCLOHEXANOL, AND METHOD FOR PRODUCING ADIPIC ACID
シクロヘキサノール、シクロヘキサノールの製造方法及び アジピン 酸の製造方法
PROCESS FOR PRODUCING ADIPIC ACID
アジピン 酸の製造方法
Summary We are supplying many kind of product like Adipic Dihydrazide as a crosslinker for Epoxy or Acrylic resins and Pyrazole/ Triazole derivatives as reducing agent for water or metal surface treatment.
アジピン酸 ジヒドラジド(ADH)のヒドラジド化合物を始め、ピラゾール化合物、トリアゾール化合物等の芳香族ベースのグレードも数多く取り揃えており、反応促進等の技術を通じて、エポキシ用硬化剤/アクリルエマルジョン用架橋剤としてニーズにお応え致します。
The electrolytic solution additionally comprises a compound selected from the group consisting of azelaic acid and an azelaic acid salt and a compound selected from the group consisting of formic acid, a formic acid salt, adipic acid, an adipic acid salt, glutaric acid and a glutaric acid salt.
本発明の電解液は、水を含む溶媒と、水溶液中でリンオキソ酸イオンを生成可能なリンオキソ酸イオン生成性化合物と、アルミニウムに配位することにより水溶性アルミニウムキレート錯体を形成 可能 なキレート化剤とを含有し、さらにアゼライン酸及びアゼライン酸塩から成る群から選択された化合物と、ギ酸、ギ酸塩、アジピン酸、 アジピン 酸塩、グルタル酸及びグルタル酸塩から成る群から選択された化合物とを含有する。
The polyamide resin is composed of an adipic acid unit, a pentamethylenediamine unit and a 6-aminocaproic acid unit, wherein the weight ratio between the total amount of the adipic acid unit and the pentamethylenediamine unit and the amount of the 6-aminocaproic acid unit ranges from 97:3 to 75:25.
アジピン 酸単位、ペンタメチレンジアミン単位および6-アミノカプロン酸単位を構成成分として含むポリアミド樹脂であって、アジ ピン 酸単位とペンタメチレンジアミン単位の合計と6-アミノカプロン酸単位との重量比が97:3~75:25であるポリアミド樹脂。

参考:「adipsia」の例文一覧

例文 He was diagnosed with psychogenic adipsia and was treated successfully with fluids, mirtazapine and clonazepam.
彼は心因性脂肪症と診断され、輸液、ミルタザピン、クロナゼパムによる治療に成功した。
【adipsia】に関するの例文(英語の例文と和訳)
例文 A thorough clinical investigation confirmed a diagnosis of primary adipsia and hypernatraemia secondary to a non-secretory neuroendocrine pituitary macroadenoma.
綿密な臨床検査により、非分泌性神経内分泌下垂体巨大腺腫に続発する原発性脂肪症および高ナトリウム血症の診断が確認されました。

「adipsia」のネイティブ発音(読み方)を聞きましょう!

読み方は【eɪˈdɪpsɪə】です。下記動画を聞きながらeɪˈdɪpsɪəを大声で発音しましょう

【絶対聞こう】アメリカ人が「adipsia」の意味について解説】!


adipsiaの実際の意味・ニュアンス(アジピン)を理解して、正しく使いましょう!

A process for producing adipic acid, characterized in that a wastewater containing hydroxycaproic acid and discharged from the step of oxidizing cyclohexane with molecular oxygen in a liquid phase is reacted with hydrogen peroxide in the presence of a tungsten catalyst in the pH range of 0 to 6.
シクロヘキサンを分子状酸素で液相酸化する工程から排出されるヒドロキシカプロン酸を含む排水と、過酸化水素とを、pH0~6の範囲でタングステン触媒の存在下に反応させることを特徴とする アジピン 酸の製造方法を提供する。
Main Applications Vinyl Chloride Resin Plasticizers A non-migrating plasticizer can be made by reacting with an aliphatic diacid such as adipic acid to form a low molecular weight polyester which subsequently undergoes esterification with an aliphatic alcohol like hexanol.
主な用途 塩化ビニル樹脂可塑剤 アジピン 酸等の脂肪族2塩基酸と反応させ低分子量のポリエステルとした後に末端カルボキシル基をヘキシルアルコールのような脂肪族アルコールでエステル化し、非移行性の可塑剤として使用できます。
The success of this reaction has implications for both the biocatalytic production of the commodity chemical adipic acid, a precursor for nylon, and in the design of other proteins.
この反応の成功は、ナイロンの前駆体である汎用化学物質 アジピン 酸の生物触媒による生産とともに、ほかのタンパク質の設計に関しても意義のあるものである。
The authors noted that the missing reaction from a biocatalytic process to make the widely-used adipic acid was very similar to the reaction catalyzed by a mutant of isocitrate dehydrogenase identified in cancer cells.
研究チームは、広く利用されている アジピン 酸を製造する生物触媒過程に欠けている反応が、がん細胞に発見された変異型のイソクエン酸脱水素酵素が触媒する反応に酷似していることに気付いた。
This year, the Grand Prize winner was chosen for its achievement in reducing greenhouse gas emissions during the process of producing adipic acid, a raw material for nylon in fiscal 2004, by 50 percent compared to level of tfiscal 1990, the base year.
大賞に輝いた旭化成グループは、ナイロンなどの原料となる アジピン 酸の製造工程で温室効果ガス排出量を基準年度である1990年度より50%まで削減した(2004年度)ことが評価された。
Polyamide MXD6 is a crystalline thermoplastic polymer, manufactured from m-xylylene diamine (MXDA) and adipic acid.It exhibits higher mechanical strength/modulus and lower water absorption, compared to polyamide-6 and polyamide-66.
ポリアミドMXD6は、メタキシリレンジアミン(MXDA)と アジピン 酸とから得られる結晶性の熱可塑性ポリマーであり、ポリアミド6やポリアミド66と比較し、機械的強度や弾性率が高く、吸水性が低いなどの特長を有しています。
On February 28, 1935, Gerard Berchet, under the direction of Carothers, produced a half-ounce of polymer from hexamethylenediamine and adipic acid, creating polyamide 6-6, the substance that would come to be known as Nylon.
1935年2月28日、ジェラード・ベルシェはカロザースの指導でヘキサメチレンジアミンと アジピン 酸から半オンスの重合体、ポリアミド 6-6 を作り、これがナイロンと名付けられた。
The organic acid is preferably any of glutaric acid, adipic acid, azelaic acid, glycolic acid, diglycolic acid, picolinic acid or 2-phenylsuccinic acid, and the added quantity thereof is preferably 0.5 to 5.0 mass %.
有機酸は、グルタル酸、 アジピン 酸、アゼライン酸、グリコール酸、ジグリコール酸、ピコリン酸、2フェニルコハク酸のいずれかであることが好ましく、添加量は、0.5~5.0質量%とすることが好ましい。
Specifically disclosed is a method for producing a tablet in which a morphinan compound represented by the general formula (I) below or a pharmacologically acceptable acid addition salt thereof and an acidic substance such as fumaric acid, maleic acid or adipic acid are blended.
該製造方法は、下記一般式(I)で表されるモルヒナン化合物またはその薬理学的に許容される酸付加塩と、例えばフマル酸、マレイン酸、 アジピン 酸等の酸性物質とを配合してなる錠剤の製造法であって、酸性物質との配合前にモルヒナン化合物またはその薬理学的に許容される酸付加塩を賦形剤と共に湿式造粒することを特徴とする錠剤の製造法である。
Succinic acid Succinic acid may be of interest as a key building block for deriving various commodity chemicals including 1,4-butanediol, adipic acid and tetrahydrofuran as well as biodegradable polymers such as polybutylene succinate and polybutylene succinate adipate.
バイオプロセスによってより安価な生産が可能となれば、1,4-ブタンジオール、 アジピン 酸、テトラヒドロフランなど様々な汎用化学品の原料として、さらにポリブチレンサクシネート(PBS)などのポリマー原料としての展開も見込まれておりコハク酸生産のバイオプロセス化が近年注目されています。
The cellulose ester composition contains (A) a cellulose ester and (B) a plasticizer, and the plasticizer of component (B) contains at least one substance selected from among the adipic acid esters represented by formulas (I), (II), and (III).
(A)セルロースエステルと(B)可塑剤を含んでおり、前記(B)成分の可塑剤が、下記式(I)、(II)及び(III)でそれぞれ表される アジピン 酸エステルから選ばれる少なくとも1種を含んでいるセルロースエステル組成物。
The cellulose resin composition is produced by adding a polyester plasticizer (A) to a cellulose resin, wherein the polyester plasticizer (A) is produced by the reaction between a polybasic acid component and a polyhydric alcohol, and wherein succinic acid and adipic acid make up 80 mol% or more of the polybasic acid component.
セルロース系樹脂に、(A)ポリエステル系可塑剤を添加して得られるセルロース系樹脂組成物であって、(A)ポリエステル系可塑剤が、多塩基酸と、多価アルコールとの反応により得られたものであり、多塩基酸の80モル%以上がコハク酸および アジピン 酸であるセルロース系樹脂組成物である。
The anticorrosive agent preferably is a nitrogen-containing organic compound such as 1H-1,2,4-triazole, benzotriazole, or the like, or an organic compound having a carboxyl group, for example, a dicarboxylic acid such as malonic acid, succinic acid, glutaric acid, adipic acid, pimelic acid, maleic acid, phthalic acid, malic acid, and tartaric acid, or a tricarboxylic acid such as citric acid.
防食剤は、1H-1,2,4-トリアゾールやベンゾトリアゾールなどの窒素含有有機化合物、又はカルボキシル基を有する有機化合物、例えば、マロン酸、コハク酸、グルタル酸、 アジピン 酸、ピメリン酸、マレイン酸、フタル酸、リンゴ酸及び酒石酸のようなジカルボン酸、並びにクエン酸のようなトリカルボン酸であることが好ましい。
This pharmaceutical composition for oral administration contains, as an active component, a 4-((1-methylpyrrole-2-yl)-carbonyl)-N-(4-(4-morpholine-1-yl-carbonyl piperidine-1-yl)-phenyl)-1-piperazinecarboxamide or a salt or solvate thereof, and contains, as an acidic additive, adipic acid, succinic acid, fumaric acid, L-aspartic acid, L-glutamic acid, or any combination of these.
4-((1-メチルピロール-2-イル)-カルボニル)-N-(4-(4-モルホリン-1-イル-カルボニルピペリジン-1-イル)-フェニル)-1-ピペラジンカルボキサミド又はその塩もしくはその溶媒和物を有効成分として含み、酸性添加剤として アジピン 酸、コハク酸、フマル酸、L-アスパラギン酸、L-グルタミン酸、又はこれらの組み合わせのいずれかを含有する経口投与用医薬組成物。
The core-sheath composite fiber is characterized in having a polyamide as a sheath component and having as a core component a polyester that is readily eluted in an alkali, the polyester containing 2.0-5.5 mol% of an isophthalic acid component with respect to the total acid component and 3.0-6.0 mol% of an adipic acid component relative to the total acid component, the isophthalic acid component containing metal sulfonate groups, and the main repeating units of the polyester being constituted of ethylene terephthalate.
主たる繰返し単位がエチレンテレフタレートより構成され、全酸成分に対し金属スルホネート基を含有するイソフタル酸成分が2.0~5.5モル%、全酸成分に対する アジピン 酸成分が3.0~6.0モル%含有するアルカリ易溶出性ポリエステルを芯成分、ポリアミドを鞘成分としたことを特徴とする芯鞘型複合繊維。
CYCLOHEXANOL, METHOD FOR PRODUCING CYCLOHEXANOL, AND METHOD FOR PRODUCING ADIPIC ACID
シクロヘキサノール、シクロヘキサノールの製造方法及び アジピン 酸の製造方法
PROCESS FOR PRODUCING ADIPIC ACID
アジピン 酸の製造方法
Summary We are supplying many kind of product like Adipic Dihydrazide as a crosslinker for Epoxy or Acrylic resins and Pyrazole/ Triazole derivatives as reducing agent for water or metal surface treatment.
アジピン酸 ジヒドラジド(ADH)のヒドラジド化合物を始め、ピラゾール化合物、トリアゾール化合物等の芳香族ベースのグレードも数多く取り揃えており、反応促進等の技術を通じて、エポキシ用硬化剤/アクリルエマルジョン用架橋剤としてニーズにお応え致します。
The electrolytic solution additionally comprises a compound selected from the group consisting of azelaic acid and an azelaic acid salt and a compound selected from the group consisting of formic acid, a formic acid salt, adipic acid, an adipic acid salt, glutaric acid and a glutaric acid salt.
本発明の電解液は、水を含む溶媒と、水溶液中でリンオキソ酸イオンを生成可能なリンオキソ酸イオン生成性化合物と、アルミニウムに配位することにより水溶性アルミニウムキレート錯体を形成 可能 なキレート化剤とを含有し、さらにアゼライン酸及びアゼライン酸塩から成る群から選択された化合物と、ギ酸、ギ酸塩、アジピン酸、 アジピン 酸塩、グルタル酸及びグルタル酸塩から成る群から選択された化合物とを含有する。
The polyamide resin is composed of an adipic acid unit, a pentamethylenediamine unit and a 6-aminocaproic acid unit, wherein the weight ratio between the total amount of the adipic acid unit and the pentamethylenediamine unit and the amount of the 6-aminocaproic acid unit ranges from 97:3 to 75:25.
アジピン 酸単位、ペンタメチレンジアミン単位および6-アミノカプロン酸単位を構成成分として含むポリアミド樹脂であって、アジ ピン 酸単位とペンタメチレンジアミン単位の合計と6-アミノカプロン酸単位との重量比が97:3~75:25であるポリアミド樹脂。

人気急上昇中英単語一覧

最新投稿英単語一覧