「“soft key”」的含义 (noun)
词类(英语单词分类):名词
计算
专门
用于表示[键盘上的按键或手机或其他电子设备上的按钮,可以通过编程来执行不同的操作]。
中文翻译:[软键]
参考:「soft key」の例文一覧
soft key是一个英语单词,有几个不同的含义。 让我们用例句来解释每个的含义和用法!
Press
soft key
#1 (Write A) to display the input signal trace.
按
软键
#1(写入 A)显示输入信号迹线。
Press
soft key
#2 (Auto All) to set the sweep time automatically.
按
软键
#2(自动全部)自动设置扫描时间。
In addition, the order of touching the
soft key
is mentioned as <.
按
软键的
顺序由 表示。
When using a spectrum analyzer in the dark place, the problem that the characters of
soft key
can’t be read will be solved.
解决了在暗处使用频谱分析仪时无法读取
软键
上文字的问题。
Use
soft key
#1 (AVG A) to keep it in ON mode.
使用
软键
#1 (AVG A) 并将其保持在 ON 模式。
To measure return loss, use
soft key
#4 (Sample) method as shown in Figure 6.
要测量回波损耗,请选择
软键
#4(示例)上的方法,如图 6 所示。
Press
soft key
#4 (Ref Line) to set the reference line level that is used to normalize the input signal.
按
软键
#4(参考线)设置用于标准化输入信号的参考线电平。
Press
soft key
#3 (Norm Corr) and select OFF if it is not already selected.
按
软键
#3(Norm Corr)并选择“关闭”(如果尚未选择)。
Press
soft key
#2 (Execute Normalize) to save correction data and normalize the input signal to the reference line level.
按
软键
#2(执行标准化)保存修改的数据并将输入信号标准化为参考线路电平。
2 frying, re-rub, three fried
soft key
is to make tea, and a bar, to create the conditions for shaping.
2个煎锅,重新擦洗,3个煎炸
软键
,到茶、吧台,为整形创造条件。
Launch ‘Jazz Soft License Manager’ and check to make sure
soft key
is available on your system environment.
启动 Jazz Soft License Manager 并验证
这些软键
在您的系统环境中是否可用。
Selecting dBm as the desired display units.Press
soft key
#1 (Ref Level) and type the desired level using the numeric keypad.
选择 dBm 作为所需的显示单位 按
软键
#1(参考电平)并使用数字键盘输入所需的电平。
Select
soft key
#1 (10dB/div) as the desired decibels per division ratio, as shown in Figure 4 and then press the RETURN key.
选择
软键
#1 (10dB/div) 作为所需的每格分贝比,如图 4 所示,然后按 RETURN 键。
Quitting psec To quit psec press the “Off key” on the virtual keyboard (power button on the actual handset), or the “finish” button (left
soft key
on the handset).
如何退出应用程序 按虚拟键盘上的 OFF 键(电源键)或
软键
上的退出键。
Figure 8.Selecting dBm/Hz for return-loss measurement setup.Press
soft key
#7 (Noise/Hz OFF), as shown in Figure 8.
图 8. 选择 dBm/Hz 进行回波损耗测量设置 按
软键
#7(噪声/Hz 关闭),如图 8 所示。
In the intermediate position, in response to pressing any of part of the hard keys which are uncovered, a
soft key
for complementing part of the hard keys which are uncovered is displayed in a position starting from the edge of the display unit adjacent to the hard keys.
在中间位置,响应于按下任何打开的硬键,将从显示设备的与硬键相邻的边缘开始显示与打开的硬键互补的
软键
。
If you are using an activation code then please ignore this step.Double-click the SDL Trados Studio installer and follow the instructions provided.When prompted for a license, enter the path to your
soft key
license file or your activation code.SDL Trados Studio should then install successfully and you can begin to take advantage of the many intuitive and time saving features.
双击 SDL Trados Studio 安装程序并按照屏幕上的说明进行操作。当出现许可证输入屏幕时,输入
软键
许可证文件路径或激活码。成功安装 SDL Trados Studio 后,您就可以开始使用其直观高效的功能进行翻译。
Selecting 10dB/div as the desired decibels-per-division ratio.Press
soft key
#5 (Units) and select
soft key
#1 (dBm) as the desired display units, as shown in Figure 5 and then press the RETURN key.
选择 10dB/div 作为所需的每分贝比 按
软键
#5(单位),选择
软键
#1 (dBm) 作为所需的显示单位,如图 5 所示,然后按 RETURN 键 Masu。
In a state in which a
soft key
is displayed on a display unit (10), the
soft key
is set to a non-display state by the display unit (10) when an approach sensor (50) detects that a human is nearby.
如果当
软键
显示在显示部分10上时接近传感器50检测到人体非常接近,
则软键
在显示部分10上隐藏。
The function of each
soft key
will also change depending on the mode.
每个
键
的作用因模式而异。
听听“soft-key”的地道发音(发音)!
读法是【ˈsɒft ˌkiː】。 听下面的视频并大声发音【ˈsɒft ˌkiː】。

