jet liner是一个英语单词，有几个不同的含义。 让我们用例句来解释每个的含义和用法！
With the Artec Ray, we are now able to offer a full line of high-quality solutions that will enable users to 3D scan almost any object with precision, from a human fingerprint to a
jet liner
or a 10-storey building – both inside and out.
随着Artec Ray的加入，我们现在拥有了一个高质量的解决方案，可以精确地3D扫描几乎任何物体，从人类指纹到
喷气式
客机，再到具有内部和外部内饰的10层建筑。我们现在能够提供完整的阵容。
The USSR was one of the world’s first to commence the large quantity manufacture of
jet
passenger
liners
.
苏联是世界上第一个批量生产
喷气式客机的
国家。
With the rise of the
jet
-powered airliner in the late 1950s, the demand for ocean
liners
declined.
随着 20 世纪 50 年代末由
喷气发动机
驱动的大型客机的出现，对
客船的
需求开始下降。
In the petroleum industry, therefore,
liners
are generally fabricated by powder metallurgy, often of pseudo-alloys, which if tungsten alloy shaped charge
liners
un-sintered, yield
jets
that are composed mainly of dispersed fine metal particles.
因此，在石油工业中，
衬套
一般采用粉末冶金方法生产
，
并且常常是假合金，其主要由未烧成的钨合金型
装药衬套
时弥散的金属颗粒组成。
Small apex angles can result in
jet
bifurcation, or even in the failure of the
jet
to form at all; this is attributed to the collapse velocity being above a certain threshold, normally slightly higher than the
liner
material’s bulk sound speed.
小顶角可能会因
射流
分叉或根本形成而导致
射流
失败。这是由于衰减率高于某个阈值，该阈值通常略高于
衬里
材料的整体声速。
At short standoffs, the
jet
does not have room to stretch out, and at long standoffs, shaped charge
liners
eventually breaks into particles, which then tend to drift off the shaped charge
liners
of axis and to tumble, so that the successive particles tend to widen rather than deepen the hole.
间距短时，
射流
有伸展的空间，间距长时，轴向形状的装
药内衬
容易漂移和翻滚，使得颗粒最终变得连续，然后轴向形状的装
药内衬
往往不会破裂。分解成颗粒，使孔加深而不是变宽。
Among pumps axes of which are sealed by 2 or more layers or seal-less pumps the maximum specified discharge volume of which exceeds 0.6 cubic meters per hour, or vacuum pumps the maximum specified discharge volume of which exceeds 5 cubic meters per hour, or casings, casing
liners
, impellers, rotors, or
jet
pump nozzles designed as components thereof, those in which all portions that come into contact with the contents of which are composed of, lined with, or coated with materials falling under any of the following
轴采用双密封或多密封的泵或最大规定排放量超过 0.6 立方米/小时的无密封泵，或最大规定排放量为 5 立方米/小时的真空泵。外壳、外壳
衬里
的所有部件、设计为大于立方米的叶轮、转子或
喷射
泵喷嘴或其与内容物接触的部件应采用以下材料之一建造和衬里：涂层或涂层
听听“ jet liner ”的陆地声音（发音）！
读法是【ʤɛt ˈlaɪnər】。 听下面的视频并大声发音【ʤɛt ˈlaɪnər】。